December 22nd, 2024 7:17PM EST
1(888)626-4365
Lynch Fluid Controls logo
DIGITAL DISPLAY PROPORTIONAL VALVE DRIVERS
LE PM X Unit
LE PM X STANDARD SPECIFICATIONS
Operating voltage:
9 to 36 VDC
Maximum output current:
3.00 Amps
Input Signal:
5V, 10V, 4 to 20mA
Maximum ramp time:
99.5 Sec
PWM / Dither Frequency:
40-450Hz
Linearity:
1%
Operating Temperature:
-40 to +80 Celsius
Dimensions:
91mm x 40mm x 32 mm
APPLICATIONS
Automated Assembly equipment
Automated Assembly Equipment – The LE PM X is ideal for hydraulically driven automotive assembly equipment to proportionally control the movement of cylinders do to its M12 connection.
Boom lift extended
Material Handling – Allows for a smooth operation for a proportional conveyer belt system with an industry standard M12 connection.

LE PM X
Shop Now

Direct DIN solenoid mounted driver with a 4 pin M12 connector.
The LE PM X valve driver supplies a solenoid with current proportional to the input signal from a potentiometer, joystick, PLC or other control system. These amplifiers allow for a smooth operation for any proportional application and can be used with any proportional valve brand including; Sun Hydraulics, Parker, Bosch Rexroth, Vickers, Denison, Yuken, Argo-Hytos, etc.
FEATURES AND BENEFITS
  • Microcontroller design.
  • Independent adjustments (Incl. ramp up & ramp down).
  • 4 digit extra bright seven segment LED display.
  • Large, easy-to-use adjustments and readout.
  • Display and adjust actual values (Current & Voltage).
  • Wide range of supply voltage.
  • User selectable input type through menu setup.
  • Wide ramp time range (0 to 99.5 Sec).
  • Simple control with analog input, locally supplied reference voltage.
  • Energy efficient PWM circuit/no heat sink required.
  • Electronic limiting circuit/short circuit proof.
  • Reverse polarity, command Input protection.
  • Load can be connected & disconnected live.
  • Current sensing maintains output regardless of changes in supply voltage and coil resistance.
  • Easy troubleshooting/cable length not an issue.
  • 4 pin M12 connector.
Set-up Video
CE and RoHS certificate
This product has been designed and tested to meet specific standards outlined in the European Electromagnetic Compatibility Directive (EMC) 2004/108/EC
Emission: EN 61000-6-4: 2007, EN 55011:2009
Immunity: EN 61000-6-2: 2005, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-4, EN 61000-4-8:2001
RoHS: EN 50581:2012
Lynch Headquarters Mississauga on map.
Canada
1799 Argentia Road
Mississauga, Ontario, L5N 3A2
Lynch Headquarters New York on map.
U.S.A.
3790 Commerce Court Suite 500,
North Tonawanda, New York, 14120